1967 Sunbeam tiger Racecar

Contact Information
Contact Donald Smith
$ 45,000.00
More Information

1967 Sunbeam Tiger MK1A Road Racer SCCA C Production B00382001850LROFE
built in 1966 but titled as 1967
Race Prepared in 1977. Raced thru 1981 then put in storage and coated with rustproofing.
Unremarkable race history total of 11 races.
Logbook and title comes with car. Logbook matches stamp on roll cage.
Raced at 2280 lbs without driver with some ballast.

289 HIPO with 10.5:1 Mondello heads, forged pistons. Shelby super snake cam
HIPO F4B cast iron intake with holley 600 Double Pumper
Sanderson headers with cross pipe
ATL 22 gallon fuel cell with dual pumps
dual point distributor with MSD 6T ignition
Accusump oil accumulator system with custom built 8 qt deep,winged, gated oil pan
with windage tray and oil cooler.
Aluminum Radiator.
Engine not locked up, turns over but has not been allowed to start.

Stock Ford close ratio top loader with Hurst comp shifter.
Aluminum flywheel, Boss 302 clutch.

Ken Mattice modified 1.8 turns lock to lock steering with MGB arms

3 complete rear axles;
2.88 spool with LAT 46 rear disc brakes
3.31 Posi with hubs but no brakes (never used)
3.73 Posi with drum brakes (currently on the car)

3 sets of rims
13x8 slotted mag style
13x8 spun modular rims
390mm TRX rims and tires (garage roll around )

LAT lowered stiff front springs with 1 inch front sway bar. Re-positioned A arms.
dearched rear springs with heim jointed panhard rod and 5/8 sway bar.
adjustable rear brake proportioning valve. Battery relocated to original alpine location.

Donahue layback seat with custom dash. Setpoint gauges with master warning light.

This car is an unrestored period correct late 70's race car.
The only sheet metal missing is the cowl cover, the soft top bulkhead, and the
trunk floor. All the stock fender openings are intact under the flares. Only rust is a
light sheen on the x member and exhaust system, bottom interior edge of passenger door frame, and bottom interior edge of trunk lid.

spare set headers, unused
complete set of pistons and seals for 4 wheel girling disc caliper rebuild
spare girling caliper
new tandem master cylinder in box, bolt in replacement for stock girling.
Neal dual master firewall mount balance brake pedal with new Tilton master cylinders.
Set of HIPO rods
finned cobra aluminum valve covers
2 AP racing 10 inch curved vane ventilated brake discs. 1.25 thick.

ORIGINAL : wiring harness complete, radiator overflow tank, power brake servo, 260 chromed valve covers with sunbeam plate, 2 complete rear light assemblies.

This Ad has been viewed 270 times.